Enphase Envoy Wartungshandbuch PDF herunterladen (Seite 50)

Envoy Installation and Operation

 2014 Enphase Energy Inc. 141-00011 Rev 05

NOTE: Do not click or select the box under the column labeled Select.

2. Click on the serial number of the unit showing the “DC Resistance Low - Power Off” condition.

The Control Flags screen appears.

CAUTION: The other control flags (reboot and cmd-alert) on this screen should be used only

when recommended by Enphase. Their functions are:

 reboot - reboots the inverter

 cmd-alert - clears a condition flag for a command sent

3. In the clear-dc-resistance-low box, select set.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Keine Kommentare

Enphase Envoy Wartungshandbuch Seite 50